Mercedes S-Class W-220

There is a danger of accident!

Responsibility for lighting of the car is always born by the driver. Function of automatic switching of light of headlights is only supportive application facilitating driving for the driver.

If necessary include lighting of the car manually.

Mode constant ^sveta1:

Light switch in situation 0.

Passing beam, marker lights and illumination of registration plate are included at the working engine. Driving beam cannot be turned on, join only the warning light signal can.

If the switch of light turns from situation 0, the light is turned on according to position of the switch. (Light switch — see above).

¹ According to the legislation of some countries.

Function of switching off of light of headlights with a delay

After switching off of lighting, opening and closing of one door and turning of an electronic key in the ignition lock in situation 0 or its taking out passing beam lights up.

Switching off delay duration at switching off of light of headlights with endurance of time can be regulated by several steps between values 0 also 60 seconds (are switched off).

The choice of this function — address the subsection "Individual Installation" of the Section the Multipurpose steering wheel, the multiinformation display.

Temporary switching off of function of switching off of light of headlights with endurance of time:

Before an exit from the car turn an electronic key in the lock of ignition in situation 0, then in situation 2 and then again in situation 0. In this case function of switching off of light of headlights with endurance of time after opening of a door is not activated.

Faroochistitel

The electronic key in the lock of ignition is in situation 1 or 2.

Press the button-1-, cleaning of headlights with a stream of water of high pressure is made.

The combined ^{switch 1}

1 — Passing beam (position of the switch of light)
2 — Driving and passing beam (position of the switch of light)

¹ According to the legislation of some countries.

3 — the Warning light signal (driving beam, irrespective of position of the switch of light)
4 — Lamps of the index of turn, right
5 — Lamps of the index of turn, left

Indication of turn: fix the combined switch. The reset is made automatically at turn of a steering wheel.

The indication of turn at little changes of the direction: translate the combined switch only to a point of resistance and hold it in this situation.

6 — Slightly press the switch:

one movement of brushes of a screen wiper without water supply (include only at a wet windshield)

Press the switch with overcoming a point of resistance: windscreen washer, a screen wiper (Dolivany waters in the tank of windscreen washer Routine maintenance is considered in the Head).

7 — the Screen wiper

0 Off.

I \Interval mode

At inclusion one course of brushes glass - a cleaner is carried out. After that, intervals automatically re-gulirutsya depending on amount of moisture on glass.

II \Normal mode

III \The accelerated mode

The blocked screen wiper

When blocking a screen wiper (for example, snow) remove the causes. For safety take out an electronic key from the ignition lock.

Then again include a screen wiper (an electronic key in the lock of ignition turn in situation 1).

Stains on a windshield

At the included screen wiper include windscreen washer — including during a rain. (Dolivany waters in the tank of windscreen washer Routine maintenance is considered in the Head).