Mercedes S-Class W-220

since 1998 release

Repair and operation of the car

Mercedes W220
+ Mercedes-Benz cars of the class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Automatic transmission
- Power shafts
   + Driveshaft
   - Power shafts
      Removal and installation of a flange of a power shaft and radial-stop ball bearing
      Power shaft - removal and installation
      Removal and CV JOINT installation and protective covers of power shafts
   + Differential
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment

Removal and CV JOINT installation and protective covers of power shafts


37a — the Power shaft 37b — the External hinge 37s — the Internal hinge 37d — a hinge Nave 37e — the Ball 37f — the Separator	37g — the Lock ring 37h — the Cover 37i — the Epiploon 37k — the Collar 37I, 37m — Protective covers

Removal

PERFORMANCE ORDER

1. Remove a power shaft.
2. Remove collars 37k.
3. Uncover 37h and an epiploon 37i on a hinged ring of 37 pages.
4. Remove a lock ring 37g.
5. Remove a protective cover 37l with an epiploon 37i.
6. Remove the internal hinge 37c - 37f from a power shaft.
7. Remove a protective cover 37m.

Installation

PERFORMANCE ORDER

Installation is carried out as it should be, the return to removal.

Amount of lubricant: the internal hinge - 120-150 g; the external hinge - 120 g.