Mercedes S-Class W-220

since 1998 release

Repair and operation of the car


Mercedes W220
+ Mercedes-Benz cars of the class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Automatic transmission
- Power shafts
   + Driveshaft
   - Power shafts
      Removal and installation of a flange of a power shaft and radial-stop ball bearing
      Power shaft - removal and installation
      Removal and CV JOINT installation and protective covers of power shafts
   + Differential
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment



Power shaft - removal and installation

Power shaft. View of a suspension bracket of a back wheel


Removal

 PERFORMANCE ORDER

1. Remove final system from flange connection.
2. Remove a cable guide.
3. Disconnect the operating lever from the regulator of level of a body or the sensor of level of a body (model with ADS).
4. Uncover the fuel pump (petrol engines).
5. Turn off a nut of fastening of a power shaft.
6. Remove a back wheel.
7. Take power shafts from flanges of wheels.

8. Disconnect power shafts 37 from transmission flanges.


Check

 PERFORMANCE ORDER

Check CV JOINTS, protective covers and covers for absence of damage and leaks.


Installation

 PERFORMANCE ORDER

Installation is carried out as it should be, the return to removal.