Mercedes S-Class W-220

since 1998 release

Repair and operation of the car

Mercedes W220
+ Mercedes-Benz cars of the class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Automatic transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   Security measures
   - Forward suspension bracket
      Removal and installation of a forward suspension bracket
      Adjustment of a gap in the bearing of a forward wheel
      Nave of a forward wheel
      Rotary fist
      Stabilizer of cross stability
      Pneumatic rack shock-absorber
   + Back suspension bracket
   + Steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment

Rotary fist



At removal of a rotary fist the shock-absorber has to be installed.

1. Remove a nave of a forward wheel 9.
2. Remove a back protective guard 35.
3. Disconnect connecting draft of the 28th stabilizer of cross stability from a rotary fist 5.
4. Remove the sensor of speed L6/1 and the indicator of wear of a brake slip.
5. On models with ADS: remove the sensor of acceleration of a wheel B24/1.
6. Disconnect steering draft 10 from a rotary fist.
7. Disconnect the lower spherical support 7 from a rotary fist 5.
8. Disconnect a rotary fist 5 from the top lever 6.
9. Remove a rotary fist 5.



Installation is carried out as it should be, the return to removal.