Mercedes S-Class W-220

since 1998 release

Repair and operation of the car



Mercedes W220
+ Mercedes-Benz cars of the class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Automatic transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   Security measures
   - Forward suspension bracket
      Removal and installation of a forward suspension bracket
      Adjustment of a gap in the bearing of a forward wheel
      Nave of a forward wheel
      Rotary fist
      Stabilizer of cross stability
      Pneumatic rack shock-absorber
   + Back suspension bracket
   + Steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment





Adjustment of a gap in the bearing of a forward wheel

9d — the Nut
9e — a nave Cover
9i, 48a — Bolts

015 — an indicator Support
022 — the Indicator


 PERFORMANCE ORDER

1. Remove a forward wheel.
2. Screw a bolt 48a fastenings of a wheel.
3. Block a forward brake disk a brake support, having pressed a brake pedal.
4. Uncover 9e naves.
5. Turn off a nut 9d.
6. Attach the indicator 022 with a support 015.
7. Adjust a gap in the wheel bearing rotation of a nut (shooter) in the necessary direction.
Gap in the bearing of a forward wheel: 0.01-0.02 mm.
8. Tighten a bolt 9i and double-check a gap.
9. Press a brake pedal several times.